Device Setup & Integration
Systems that require Access Codes in the Olarm APP
To enable full control and monitoring through the Olarm APP, certain alarm systems require specific access codes to be entered during setup. These may include a Master Code, Keypad Code, UDL Code, or User/Reset Codes, depending on the system. Below ...
How to change your Master/Keypad/UDL/User/Reset code in the Olarm APP?
Some alarm system integrations require specific access codes - such as the Master Code, Keypad Code, UDL Code, User Code or Reset Code - to enable full control and communication with the system. Without these codes, the Olarm communicator may not be ...
Adding cameras in the Olarm APP
The Olarm APP supports the integration of third-party RTSP-enabled cameras, allowing users to monitor video feeds directly within the app. This feature is available only when used with compatible Olarm hardware. Ensure you have a supported Olarm ...
How to split areas/partitions on a single Olarm device
You are able to split a single Olarm device into different areas or partitions, so different users only see what they need to. Follow the steps below to do so: Send a request to: support@olarm.com The request must come from: the Olarm device’s ...
Setting an Olarm device to Standalone Mode
Olarm communicators can operate in standalone mode without being connected to a security system. The communicators just need to be provided with 12V of power and be set to not search for a compatible system in the Olarm APP. Standalone mode is ideal ...
How to migrate settings from my old Olarm device to a new one?
Use the Settings Migration feature in the Olarm APP to quickly transfer configuration settings from one Olarm device to another. This is useful when replacing or upgrading an existing device. If you are installing a new Olarm device and want to apply ...
How to change the name of your Olarm Device
How to change the name of your Olarm device To change the name of your device in the Olarm APP: Open the Olarm APP and go to the Home screen. Tap the menu icon (≡) in the top-right corner. Select Device Setup from the menu. Tap Device Name. Enter ...
How do I add a device to my app?
Adding a devices using the device menu dropdown Tap on the device dropdown menu. Tap on "+". Scan the QR Code at the back of the Olarm Or enter the devices serial number and verification code located at the back of the Olarm Name your Olarm Tap on ...