Which alarm systems support PGMs (Programmable Outputs) via the Olarm APP?

Which alarm systems support PGMs (Programmable Outputs) via the Olarm APP?

PGMs, or Programmable Outputs, allow alarm systems to trigger external devices such as gates, lights, or sirens based on specific events or commands. These outputs can often be controlled remotely when integrated with systems like Olarm PRO/PRO 4G or Olarm MAX.

Below is a list of alarm panels that support PGMs:

  • Paradox EVO192

    • Supports PGMs via utility keys

  • Paradox MG/SP Series

  • Orisec

  • DSC PowerSeries NEO

  • Texecom Premier Elite

  • Texecom Premier

  • IDS 806

  • IDS X-Series Serial

  • IDS X16 & X64

Extra Tips

  • PGM functionality and configuration may vary by panel model and firmware.

  • Ensure that PGMs are correctly set up in the panel programming before attempting remote control via the Olarm APP.

  • Consult your alarm panel’s installation manual for specific wiring and configuration steps.

    • Related Articles

    • Why a zone would not be bypassing in the Olarm APP

      If the Olarm APP is not bypassing a zone, it could be caused by either the alarm system settings or a problem with the detector in that zone. Bypassing allows you to exclude a zone from triggering alarms when the system is armed, so if it fails, the ...

    • Systems that require Access Codes in the Olarm APP

      To enable full control and monitoring through the Olarm APP, certain alarm systems require specific access codes to be entered during setup. These may include a Master Code, Keypad Code, UDL Code, or User/Reset Codes, depending on the system. Below ...

    • How to Part Arm a Texecom Elite

      When using the Olarm APP with a Texecom Elite alarm system, the home screen provides quick access to each area of your system. Each area is represented as an Area Card, giving you real-time status updates and control options. Area Cards Overview Each ...

    • What are active or open zones in the Olarm APP

      In the Olarm APP, each zone of your alarm system is represented by a zone card. These zone cards provide a quick visual indication of the status of that zone, making it easier to see whether there has been any activity. A zone can either be closed ...

    • Can’t arm/disarm your alarm system in the Olarm APP

      If you are unable to arm/disarm your alarm system via the Olarm APP, follow the steps below to troubleshoot the issue. Check the Area/Partition Status In the Olarm APP home screen, confirm that the area/partition shows Disarmed. If the partition ...