Systems that require Access Codes in the Olarm APP

Systems that require Access Codes in the Olarm APP

To enable full control and monitoring through the Olarm APP, certain alarm systems require specific access codes to be entered during setup. These may include a Master Code, Keypad Code, UDL Code, or User/Reset Codes, depending on the system.

Below is a list of the alarm systems and energizers, as well as their corresponding code types required for integration.

IDS (Master code required)

  • 805

  • 806

  • X-Series

  • X-Series Serial

Paradox Plus (Master code required)

  • MG5050+

  • SP6000+

Texecom Elite (UDL code required)

  • 24

  • 48

  • 64

  • 64-W

  • 64-W LIVE

  • 88

  • 168

Texecom Premier (UDL code required)

  • 168

DSC PowerSeries (Master code required)

  • PC1555

  • PC1616

  • PC832

  • PC864

  • PC1808

  • PC1832

  • PC5005

  • PC5010

  • PC5015

  • PC5020

DSC PowerSeries NEO (Master code or UDL code required)

  • HS2016

  • HS2032

  • HS2064

  • HS2128

Orisec (UDL code required)

  • CP-50

  • CP-60

  • CP-100

  • ZP-10

  • ZP-20

  • ZP-40

  • ZP-100

Honeywell (Master/Keypad code required)

  • G2-12

  • G2-20

  • G2-44

  • G2-44+

Nemtek (User and Reset codes required)

  • Druid 13

  • Druid 15

  • Druid 18

  • Druid 20

  • Druid 25

  • Druid 28

  • Merlin Stealth M18S

  • Merlin Stealth M28X

  • Merlin 4i

Extra Tips

  • Always confirm the correct code type before setting up your device in the Olarm APP.

  • Entering an incorrect code may result in limited or failed communication with the alarm panel or energizer.

  • If you're unsure which code to use, refer to the alarm system’s or energizer’s manual, alternatively consult the installer.

    • Related Articles

    • How to change your Master/Keypad/UDL/User/Reset code in the Olarm APP?

      Some alarm system integrations require specific access codes - such as the Master Code, Keypad Code, UDL Code, User Code or Reset Code - to enable full control and communication with the system. Without these codes, the Olarm communicator may not be ...

    • Why a zone would not be bypassing in the Olarm APP

      If the Olarm APP is not bypassing a zone, it could be caused by either the alarm system settings or a problem with the detector in that zone. Bypassing allows you to exclude a zone from triggering alarms when the system is armed, so if it fails, the ...

    • How to reset an Olarm device in the Olarm APP

      This will remove your access and reset the device to factory settings. Tap the menu icon (≡) in the top-right corner Select Device Setup Tap on Remove/Reset Olarm Confirm by tapping Agree Alternatively, you can reset the device using the Web Portal ...

    • How to identify the Primary User of a device in the Olarm APP

      In the Olarm APP, each device has a Primary User who has full control over its settings and management. If you are a Secondary User, you can easily see who the Primary User is. This is useful if you need to request changes, transfer ownership, or ...

    • How do I reset my Olarm account password

      If you've forgotten your Olarm APP password, follow these simple steps to reset it: Open the Olarm APP and on the Sign-in page. Tap on Forgot your password?. Enter the email address or mobile number for your Olarm account and tap Submit. You’ll ...