Adding cameras in the Olarm APP

Adding cameras in the Olarm APP

The Olarm APP supports the integration of third-party RTSP-enabled cameras, allowing users to monitor video feeds directly within the app. This feature is available only when used with compatible Olarm hardware.



Extra Tips

  • Ensure your camera supports RTSP streaming before attempting to link it.

  • Connect cameras and the Olarm MAX to the same network during initial setup.

  • Refer to your camera’s user manual for RTSP URL configuration if using a brand not listed.

    • Related Articles

    • How to add secondary users to an Olarm device

      Adding a Secondary User The Olarm APP supports 1 Primary user and 256 Secondary users on all Olarm communicators. In order to add secondary users to your Olarm device, they will require an Olarm User Account. Tap the menu icon (≡) in the top-right ...

    • How do I add a device to my app?

      Adding a devices using the device menu dropdown Tap on the device dropdown menu. Tap on "+". Scan the QR Code at the back of the Olarm Or enter the devices serial number and verification code located at the back of the Olarm Name your Olarm Tap on ...

    • Olarm subscriptions

      The basics Olarm devices require an active subscription to work as they contain Olarm-managed SIM cards and consume online services which need to be maintained and paid for. How do I buy an Subscription:. Purchasing an Olarm subscription via the ...

    • Olarm Home Assistant Integration and Setup

      How to Integrate Olarm with Home Assistant via HACS Many Olarm users have requested an official Home Assistant integration over the years. We heard you, and the official integration is currently under Home Assistant review. While you wait, you can ...

    • How to reset an Olarm device in the Olarm APP

      This will remove your access and reset the device to factory settings. Tap the menu icon (≡) in the top-right corner Select Device Setup Tap on Remove/Reset Olarm Confirm by tapping Agree Alternatively, you can reset the device using the Web Portal ...