Some alarm system integrations require specific access codes - such as the Master Code, Keypad Code, UDL Code, User Code or Reset Code - to enable full control and communication with the system. Without these codes, the Olarm communicator may not be able to send commands or retrieve alarm system data.

Refer to this article to check which alarm systems require a specific code.

This does not change your alarm system code on the security system.

To configure your Olarm device with the required access code:

• Tap the Menu icon (≡) in the top-right corner

• Select Device Setup from the menu

• Scroll down to find the relevant code field:

  • Master/Keypad Code

  • UDL Code

  • User Code

  • Reset Code

• Tap the code field and enter the correct code based on your alarm system requirements.
  
  

Extra Tips

• The required code type varies depending on the alarm system or energizer model.

• Ensure the code entered matches the one configured on the alarm panel or energizer.

• If you're unsure which code to use, consult the alarm system or energizer installer or manual.