Connecting your Olarm to Wi-Fi using WPS Mode

How to connect my Olarm to Wi-Fi using WPS Mode?

Connecting your Olarm to Wi-Fi using WPS Mode

You can now connect your Olarm PRO to your Wi-Fi network using the WPS Mode, please note only 2.4Ghz Wi-Fi Networks are supported

On your WPS capable Router

  1. Press the WPS mode button on the Wi-Fi router

On your Olarm PRO

  1. Once the Olarm PRO has been powered on
  2. Wait for it to start flashing green
  3. Press and hold the Fn button on the Olarm PRO for 5 seconds until it turns yellow
  4. The Olarm PRO will then turn solid blue once connected to the Wi-Fi

Olarm APP

Wi-Fi should now show connected in Olarm APP

Please note only certain firmware versions support this feature. 

Firmware requirements:
  1. 4G, firmware 4.4.2 and up
  2. 2G, firmware 3.5.2 and up
Olarm PRO’s from Batch “-M” onwards will come with Firmware able to utilise WPS mode out of the box, however older Batches will need to be updated before this feature will works.
If you need to find out more about updating your Olarm PRO firmware, please click on the link below and follow the easy guide.

The Batch is displayed on the back of the Olarm Radio as well as on the back of the Box.

If you have any problems, please feel free to contact Olarm Support
Phone: +27 21 009 0911 
WhatsApp: +27 60 039 0911 
E & OE. Terms & conditions may apply.

    • Related Articles

    • How to set up the WiFi connection?

      Once the Olarm PRO has been added to your Olarm App, you will have a banner at the top prompting for WiFi Setup, alternatively you can also navigate to Settings, Tapping on the 3 lines in the top right corner of the Olarm App. Then tap WiFi Setup. ...
    • Olarm PRO 4G

      Olarm PRO 4G The Olarm PRO now provides even better connectivity with support for 4G. 4G (also known as LTE) provides substantial performance improvements over previous mobile technologies, and our 4G device is designed to offer connectivity ...
    • Updating your Olarm Firmware

      Firmware updates can only be done by the Primary User of the Olarm Keep your Olarms Firmware up to date by simply following the steps listed below. Select the Olarm you would like to update Tap on the menu button in the top right corner Tap on Device ...
    • Olarm States

      App Statuses Main Menu The Olarm Main menu has 3 different states indicating the status of the Olarm Radio Online - The Olarm is connected to the Panel and Cloud Offline - The Olarm has either lost power or connection to the Cloud Problem - The Olarm ...
    • Olarm Areas and Zones overview

      Areas Olarm allows you to arm and disarm areas, stay and sleep arming is also supported on selected Panels There are five Areas statuses • Disarmed (Green) • Armed (Red) • Stay Armed (Yellow) • Sleep Armed (Blue) Selected Panels only • Countdown ...