Updating your Olarm Firmware

How to update your Olarm PRO's Firmware

Firmware updates can only be done by the Primary User of the Olarm

Keep your Olarms Firmware up to date by simply following the steps listed below.
  1. Select the Olarm you would like to update
  2. Tap on the menu button in the top right corner
  3. Tap on Device Setup
  4. Tap on Firmware Update
  5. If there is a newer version of the Firmware available, tap on Update Firmware
  6. The progress bar will start running
    1. If the Olarm is on Wi-Fi, the update will take about 2 min
    2. If the Olarm is on GSM only, the update will take about 15 min
  7. Once the update has been completed, the Olarm will restart
Note:
Devices on the following Firmware versions require Wi-Fi to update.
  1. 212.152
  2. 212.153
  3. 212.156
  4. 212.159

If you have any problems, please feel free to contact Olarm Support
Phone: +27 21 009 0911 
WhatsApp: +27 60 039 0911 
E & OE. Terms & conditions may apply.

    • Related Articles

    • Olarm PRO for JVA energizers

      Step 1 - Locate your alarm panel Please be aware that energizer is not the keypad. Energizers are typically installed in a hidden location in the home such as a cupboard or basement. Supported Models Z11, Z13, Z14, Z18, Z25, Z28 Note: Only JVA ...
    • Olarm PRO for Paradox Plus Series

      Supported Models MG5050+ SP6000+ Step 1 - Locate your alarm panel Note that the alarm panel is not the keypad. Alarm panels are typically installed in a hidden location in the home such as a cupboard or basement. Step 2 - Unbox your Olarm PRO The ...
    • Olarm PRO for Paradox

      For Olarm MAX installation guides - Click here Supported Models MG5050 MG5050+ SP6000 SP6000+ SP65 EVO192 Step 1 - Locate your alarm panel Note that the alarm panel is not the keypad. Alarm panels are typically installed in a hidden location in the ...
    • Olarm PRO for Paradox EVO192

      For Olarm MAX installation guides - Click here Step 1 - Locate your alarm panel Note that the alarm panel is not the keypad. Alarm panels are typically installed in a hidden location in the home such as a cupboard or basement. Step 2 - Unbox your ...
    • Olarm PRO for IDS X16 & X64

      For Olarm MAX installation guides - Click here Step 1 - Locate your alarm panel Note that the alarm panel is not the keypad. Alarm panels are typically installed in a hidden location in the home such as a cupboard or basement. Step 2 - Unbox your ...