Enabling Playback in the Olarm APP of your Hikvision IP camera

Requirements:

1. DVR/NVR that is recording
   
2. Olarm MAX connected to an Alarm System with zones
   
3. Successfully added camera to the Olarm MAX and Olarm APP
   
4. NTS setup (time needs to be accurate on the DVR/NVR)
   

Please also refer to following guides:

1. Setting up a Hikvision camera for Olarm MAX Video
   
2. Adding a Hikvision camera in the Olarm APP

Playback enables you to link recorded video footage from your DVR/NVR to your Olarm APP’s zone activity history. When a zone is activated, this event is stored in the app’s activity log which will then have a 10 second clip attached to the log entry.

You will need to enable the NTP (Network Time Protocol). The NTP function allows a device that is connected to the Internet to sync time with a NTP server. This ensures the time on your camera's and DVR/NVR is accurate which then allows the Olarm MAX to match zone activity events to recorded footage for playback in the Olarm APP.

• Navigate to “Configuration”

• Click on “System Settings”

• Select the “Time Settings” tab

• Toggle the “Tick box” to enable NTP
  

Step 1: Enable playback in the Olarm APP

Step 2: Enter the Playback path/URL

The standard HikVision camera Playback path/URL is as follows, ensure you edit it to suit your camera channel number:

/Streaming/tracks/202

• Ensure you enter your relevant camera’s channel number (1-48)

• Ensure you enter 02 should your DVR/NVR be recording on its sub-stream, do not use 01 which is the mainstream

Step 3: Select the Hikvision playback time format

Hikvision’s standard playback time format is as follows:

<YYYYMMDD>T<HHmmss>Z

Step 4: Save the playback settings and test out activity log by triggering the linked zone

• Related Articles

• Enabling Playback in the Olarm APP of your Hikvision DVR camera

  Requirements: DVR/NVR that is recording Olarm MAX connected to an Alarm System with zones Successfully added camera to the Olarm MAX and Olarm APP NTS setup (time needs to be accurate on the DVR/NVR) Please also refer to following guides: Setting up ...

• Enabling Playback in the Olarm APP of your Dahua IP camera

  Requirements: DVR/NVR that is recording Olarm MAX connected to an Alarm System with zones Successfully added camera to the Olarm MAX and Olarm APP NTP (Network Time Protocol) enabled on DVR/NVR Please also refer to the following articles for setup: ...

• Enabling Playback in the Olarm APP of your Hikvision NVR camera

  Requirements: DVR/NVR that is recording Olarm MAX connected to an Alarm System with zones Successfully added camera to the Olarm MAX and Olarm APP NTS setup (time needs to be accurate on the DVR/NVR) Please also refer to following guides: Setting up ...

• Adding a Hikvision IP camera in the Olarm APP

  This guide is unique to Hikvision IP camera's and their setup. Ensure that you have adjusted your Hikvision IP camera to the required settings. Please refer to the following guides should you have a Hikvision DVR or NVR: Hikvision DVR camera's setup ...

• Adding a Dahua IP camera in the Olarm APP

  This guide is unique to Dahua IP cameras and their setup. Ensure that you have adjusted your Dahua IP camera to the required settings. Please refer to the following guides should you have a Hikvision DVR or NVR: Dahua DVR camera's setup for Olarm MAX ...