Adding a Provision DVR camera in the Olarm APP

Adding a Provision DVR camera in the Olarm APP

Info
This guide is unique to Provision cameras/DVRs and their setup. Ensure that you have adjusted your Provision camera/DVR to the required settings.
​
​
Step 1: Navigate to you Olarm MAX’s Device setup and select Linked cameras



Step 2: Select Add new Camera



Step 3: Give your Camera a Name



Step 4: Enter your Provision DVR's IP Address





Step 5: Enter the Port number


The Port is the number assigned to the RTSP Port on your DVR. The default RTSP Port number is 554. This may have been changed upon setup.

To check the RTSP Port number:

  • Navigate to the “Function panel” tab

  • Select “Network” and choose “Port”

  • Ensure that RTSP is enabled

  • The RSTP Port number will be displayed here






Step 6: Enter the Live stream path/URL


The standard Provision camera Live stream path/URL is as follows, ensure you edit it to suit your camera channel number:

/chID=2&streamType=sub&linkType=udp

  • Ensure you enter (1-48) for your camera/channel number

  • Ensure you enter sub for substream and not main for mainstream



Step 7: Enter the User Name and Password used to login to the Video Management System or DVR




Info
Ensure that you make use of the login credentials used to access your Provision platform or Provision DVR. The appearance may vary if you are using the Provision Video Management System or logging directly into the DVR.



Step 8: Choose which zones the camera will be linked to



Info
This feature is only available should you have added the camera to an Olarm MAX that is connected to an Alarm System with zones. 

Step 9: Toggle the buttons to allow Armed Response access to the camera feed & allow device users access to the camera feed



Step 9: Tap on Test connection which will verify the details entered then select Add




Should the “Test connection fail”, recheck the details you have entered in the Olarm APP. Alternatively, you will need to visit the troubleshooting guide.

    • Related Articles

    • Adding a Hikvision DVR camera in the Olarm APP

      This guide is unique to Hikvision DVRs and their setup. Ensure that you have adjusted your Hikvision DVR cameras to the required settings. Step 1: Navigate to you Olarm MAX’s Device setup and select Linked cameras Step 2: Select Add new Camera Step ...

    • Enabling Playback in the Olarm APP of your Hikvision DVR camera

      Requirements: DVR/NVR that is recording Olarm MAX connected to an Alarm System with zones Successfully added camera to the Olarm MAX and Olarm APP NTS setup (time needs to be accurate on the DVR/NVR) Please also refer to following guides: Setting up ...

    • Adding a Hikvision IP camera in the Olarm APP

      This guide is unique to Hikvision IP camera's and their setup. Ensure that you have adjusted your Hikvision IP camera to the required settings. Please refer to the following guides should you have a Hikvision DVR or NVR: Hikvision DVR camera's setup ...

    • Adding a Hikvision NVR camera in the Olarm APP

      This guide is unique to Hikvision cameras/NVRs and their setup. Ensure that you have adjusted your Hikvision camera/NVR to the required settings. Step 1: Navigate to you Olarm MAX’s Device setup and select Linked cameras Step 2: Select Add new Camera ...

    • Enabling Playback in the Olarm APP of your Hikvision IP camera

      Requirements: DVR/NVR that is recording Olarm MAX connected to an Alarm System with zones Successfully added camera to the Olarm MAX and Olarm APP NTS setup (time needs to be accurate on the DVR/NVR) Please also refer to following guides: Setting up ...