Where to find the Verification Code for your Olarm device

Where to find the Verification Code for your Olarm device

When adding a new Olarm device in the Olarm APP, you will need to enter a Verification Code to confirm ownership and link the device to your profile. This step happens after scanning the device’s QR code or entering its serial number manually.

The verification code ensures that only authorised users can claim and control the device.


Where to find the Verification Code

The location of the verification code depends on your device model:

  • Olarm PRO / PRO 4G

    • Look on the back of the device.

    • The code will be labelled “V.Code”.

  • Olarm MAX

    • Remove the backplate of the device.

    • Open the battery compartment lid.

    • The code will be inside, labelled “V.Code”.


Extra Tips

  • Keep the verification code secure—only share it with trusted installers or users.

  • If the code is damaged or unreadable, contact Olarm Support for assistance.

  • The verification code is unique to each device and cannot be reused for another unit.

    • Related Articles

    • Using the Olarm MAX and its I/O ports as a communicator-only device

      The Olarm MAX can function as a dedicated communicator for monitoring legacy alarm, fire, or panic systems that aren't directly supported. To set this up: Leave the yellow and green communication wires disconnected Power up your Olarm MAX device Add ...

    • Where to find your Olarm MAX’s serial number

      The Olarm MAX serial number is important for device registration, support, and linking to monitoring services. You can locate the serial number in several places. In the Olarm APP Open the Olarm APP. Go to Profile. Tap Devices. Select your Olarm MAX ...

    • Olarm MAX Firmware Release Notes

      This article summarises the changes for each firmware release for the Olarm MAX. In order to update the Firmware on your Olarm MAX, as a Primary user, please navigate to Device Setup then to the Firmware update tab in the Olarm APP. V1.8.0 Release ...

    • Adding a Hikvision IP camera in the Olarm APP

      This guide is unique to Hikvision IP camera's and their setup. Ensure that you have adjusted your Hikvision IP camera to the required settings. Please refer to the following guides should you have a Hikvision DVR or NVR: Hikvision DVR camera's setup ...

    • Adding a Hikvision NVR camera in the Olarm APP

      This guide is unique to Hikvision cameras/NVRs and their setup. Ensure that you have adjusted your Hikvision camera/NVR to the required settings. Step 1: Navigate to you Olarm MAX’s Device setup and select Linked cameras Step 2: Select Add new Camera ...