How do I part arm my Texecom Elite?

How do I part arm my Texecom Elite?

Home Screen

Each area on your alarm system will be displays as an individual Area card on your Texecom Elite home page.

Each Area card displays:

  1. Area number
  2. Name
  3. Current alarms status
  4. Last status update
  5. Alarm functions 
  6. Disarm
  7. Full arm
  8. Part-arm
    1. Arm 1
    2. Arm 2
    3. Arm 3


Part-arm

Pressing part-arm will prompt you to enter the partitioned area to arm.







Force-arm prompt

If you attempt to arm or part-arm when any zones are open, you are asked to force these zones to arm. Doing so will bypass these zones and arm your system.

If you have any problems, please feel free to contact Olarm Support Phone: +27 21 009 0911  Email: support@olarm.com WhatsApp: +27 60 039 0911  https://olarm.com E & OE. Terms & conditions may apply.

    • Related Articles

    • Olarm Areas and Zones overview

      Areas Olarm allows you to arm and disarm areas, stay and sleep arming is also supported on selected Panels There are five Areas statuses • Disarmed (Green) • Armed (Red) • Stay Armed (Yellow) • Sleep Armed (Blue) Selected Panels only • Countdown ...

    • How do I enable a PGM?

      PGM, short for Programmable Output, allows you to customise its functions on the Panel and activate them using the Olarm App. Olarm PRO Currently for the Olarm PRO, enabling a PGM is a function only available for the listed Alarm Panels: Paradox ...

    • How do I remove an Olarm from my profile?

      There are 2 different ways of removing devices depending on your level of access: Devices where you are the primary user Devices where you are sharing as the secondary user Removing device as primary user Go to Settings by taping on the 2 lines on ...

    • Can my panel pull zones labels?

      Paradox: Only Paradox panels support label fetching if the zone/area labels have been added by the installer to the alarm system. On your Olarm App, follow these steps to fetch your alarm systems labels. Tap on the 3 lines in the top right corner of ...

    • Setting the Master/Keypad Code

      Setting the Master/Keypad Code Open the App Select the Olarm your would like to set the code for Tap on the Settings tab Tap on Device Setup Tap on the Master/Keypad button Type in the code Tap Save Only the Primary user will have the option of ...