Olarm MAX LED State Troubleshooting

• Related Articles

• How to update an Olarm MAX's firmware without connecting to a panel

  You can update your Olarm MAX firmware in two ways: Power up the device without connecting it to an alarm system or energizer If already connected to a system, simply disconnect the communication wires Once powered, the device will connect to the ...

• Troubleshooting DSC NEO

  Click here for the Olarm MAX installation guide for the DSC NEO The below articles will help you with troubleshooting your Olarm MAX installation with the DSC NEO. Olarm MAX not automatically detecting the DSC NEO The Olarm MAX does not automatically ...

• Olarm MAX Firmware Release Notes

  This article summarises the changes for each firmware release for the Olarm MAX. In order to update the Firmware on your Olarm MAX, as a Primary user, please navigate to Device Setup then to the Firmware update tab in the Olarm APP. V.1.6.2 Release ...

• Using the Olarm MAX and its I/O ports as a communicator-only device

  The Olarm MAX can function as a dedicated communicator for monitoring legacy alarm, fire, or panic systems that aren't directly supported. To set this up: Leave the yellow and green communication wires disconnected Power up your Olarm MAX device Add ...

• Olarm MAX Video troubleshoot guide

  Are you an Olarm App User? Please visit our Olarm video website to find an installer Olarm MAX Video Welcome to Olarm video troubleshoot guide. Olarm MAX to Olarm App Troubleshoot Guide These events have to do with the connection between the Olarm ...