Olarm MAX Installation Guides

• Related Articles

• Using the Olarm MAX and its I/O ports as a communicator-only device

  The Olarm MAX can function as a dedicated communicator for monitoring legacy alarm, fire, or panic systems that aren't directly supported. To set this up: Leave the yellow and green communication wires disconnected Power up your Olarm MAX device Add ...

• Olarm MAX Firmware Release Notes

  This article summarises the changes for each firmware release for the Olarm MAX. In order to update the Firmware on your Olarm MAX, as a Primary user, please navigate to Device Setup then to the Firmware update tab in the Olarm APP. V.1.6.2 Release ...

• How to update an Olarm MAX's firmware without connecting to a panel

  You can update your Olarm MAX firmware in two ways: Power up the device without connecting it to an alarm system or energizer If already connected to a system, simply disconnect the communication wires Once powered, the device will connect to the ...

• Olarm MAX Video troubleshoot guide

  Are you an Olarm App User? Please visit our Olarm video website to find an installer Olarm MAX Video Welcome to Olarm video troubleshoot guide. Olarm MAX to Olarm App Troubleshoot Guide These events have to do with the connection between the Olarm ...

• Olarm MAX Contact ID List

  The Olarm MAX comes with some additional Contact ID's and description In addition to giving a better insight into your clients system statuses, the Olarm has been designed to pro-actively alert you of any problems on site, Make sure to contact your ...