I only see 16 zones but I have more

I only see 16 zones but I have more

  1. Go to the [Settings] “3 dots”

  2. Then go to [Olarm Setup]

  3. Tap on [Zones]

  4. Set amount of zones

  5. Then tap save

    • Related Articles

    • Olarm States

      App Statuses Main Menu  The Olarm Main menu has 3 different states indicating the status of the Olarm Radio Online - The Olarm is connected to the Panel and Cloud Offline - The Olarm has either lost power or connection to the Cloud Problem - The ...
    • I am not able to bypass any zones

      On DSC and IDS: Ensure the master code been entered into the app? On All panels Ensure bypass been enabled by the installer for the zones and areas?
    • Can my panel pull zones labels?

      Paradox: Only Paradox panels support label fetching if the zone/area labels have been added by the installer to the panel Go to [Setting > Olarm Setup > Fetch Zone Labels] This will take a few minutes. Other panels: IDS, DSC and Texecom the labels ...
    • Part Arming on Texecom Elite

      Home Screen Each area on your alarm panel will be displays as an individual Area card on your Texecom Elite home page. [IMAGE] Each Area card displays: Area number Name Current alarms status Last status update Alarm functions disarm full arm part-arm ...
    • How do I add or change zone and area labels?

      As the Primary user go to: [Settings > Olarm Setup > Zones] Tap on the zone you would like to name > Tap [Name] Enter the label and tap [Save] Same process if you would like to change area labels