Olarm App: Link a camera for Olarm video

Please note: Video coming soon

Overview

Once you have changed the settings in your camera system, we can now link each camera in your Olarm app. 

See How to setup Olarm MAX video

Does your camera support RTSP?

This information is usually specified on the manufacturer’s site in the device specifications section. If such information is missing, use online services. For example, https://www.ispyconnect.com/cameras

1. Choose the manufacturer of the camera.
   
2. Locate your device model. If the device is missing from the list, it does not support this protocol and cannot be connected to the Olarm security system using an RTSP link.
   

How to link a camera in the Olarm app

Although the configuration process is similar for many routers, the names of the parameters and the settings may differ for different manufacturers.

Linking a camera in the Olarm App has 6 primary steps:

1. Adding connection settings for your camera solution
   
2. Adding your authentication details
   
3. Linking a camera to specific zones
   
4. Approve Armed Response and secondary user access
5. Testing the connection
6. Save and add the camera

Once you have linked a camera you can view that camera in your Olarm app.

Step 1:  Adding connection settings for your camera solution

1.1 Navigate to device setup

1.2 Select Add a Camera

1.3 Give your Camera a Name

1.4 Enter your cameras IP Address

1.5 Enter the Port number

554 is the standard RTSP port number for camera streams unless it was changed during the original camera setup.

1.6 Enter the live stream path/URL

The path specific to your manufacturer for streaming cameras

Dahua - /Streaming/channels/<X channel number><YY stream type number>

Hikvision - /cam/realmonitor?channel=X&subtypeY

1.7 Enter Playback path/URL

This is different to the Live Stream Path/URL. Should you want playback, you may have to activate the sub stream on your camera system.

Dahua - /streaming/tracks/XYY

Hikvision - /cam/playback?channel=X&subtype=Y

1.8 Enter the playback time format

Step 2: Enter the login username and password used to access the video management system

• Related Articles

• Olarm Video troubleshoot guide

  Olarm Video Welcome to Olarm video troubleshoot guide. Please also refer to: How to setup Olarm MAX video How to link a camera in the Olarm App https://olarm.com/video Max to App Troubleshoot Guide These events have to do with the connection between ...

• How to install TP Link Camera

  How to install an TP-Link camera. This is your help guide to install your TP-Link camera. Please note: this guide is specific to using the Tapo C200 but should be applicable to other similar cameras in the range. Install process Please ensure your ...

• Start Here: How to setup Olarm MAX video

  Please note: video coming soon Overview You can connect your DVR,XVR, NVR or most IP camera supporting RTSP protocol to the Olarm MAX video solution. RTSP is a real-time streaming protocol used for remote stream playback from a video surveillance ...

• How to install an EZVIZ Camera

  Please note: Video coming soon How to install an EZVIZ camera. Please note: this guide is specific to using the EZVIZ C8C but should be applicable to other similar cameras in the range. Please ensure your MAX wifi is on the same network as your ...

• Olarm MAX Troubleshooting for Texecom Premier Elite

  Should your Olarm APP not be able to arm or disarm. Check that “Remote Arm” & “Remote Disarm” has been enabled for all areas. See the programming steps below: Enter the Engineers code (default ‘1234’). If it says a user needs to grant you access, ...