How to dim the Olarm MAX LED light

How to dim the Olarm MAX LED light

The blue LED light on your Olarm device is designed to indicate status, but it can sometimes be too bright - especially if the device is installed in a visible location. Primary users can adjust the LED brightness in the Olarm APP to make it less distracting.

InfoThe LED cannot be turned off completely, but it can be dimmed to the point where it is barely visible.

  • Tap the Menu icon (≡) in the top-right corner

  • Navigate to the LED Brightness tab

  • Adjust the brightness slider to your preferred level

Extra Tips

  • Lowering the brightness will not affect the device’s functionality.

  • Keep the LED dimmed in bedrooms or other low-light areas for comfort.

  • The LED will still be visible enough to indicate operational status when dimmed.

    • Related Articles

    • LED States of the Olarm MAX

      LED States of the Olarm MAX The Olarm MAX uses LED indicators to display its status and connectivity. Below is a guide to understanding what each LED state means. Standard Operating States Solid White – Booting up or powering on. Flashing Green – ...

    • How to connect your Olarm MAX to Wi-Fi using WPS mode

      You can connect your Olarm device to a local Wi-Fi network using the WPS method. This process allows for quick, password-free setup using your router’s WPS button. Requirements Access to the back of your Olarm device A local Wi-Fi network within ...

    • Troubleshooting Olarm MAX LED States

      If your Olarm MAX is displaying a specific LED state, use the following troubleshooting steps to resolve connectivity and system issues. Connectivity/Connection Issue States Two Blue Flashes – Connected to the cloud via cellular but lost Wi-Fi ...

    • Olarm MAX Firmware Release Notes

      This article summarises the changes for each firmware release for the Olarm MAX. In order to update the Firmware on your Olarm MAX, as a Primary user, please navigate to Device Setup then to the Firmware update tab in the Olarm APP. V1.8.0 Release ...

    • Installation of an Olarm MAX on Honeywell Galaxy Dimension Alarm Systems

      Installation Requirements An Olarm MAX G is required for this installation. If the Honeywell Galaxy Dimension system has an existing Ethernet Module, this must be removed before installing the Olarm MAX, as it will take its place. Step 1: Connect the ...