Connecting your Olarm to Wi-Fi using WPS Mode

How to connect my Olarm PRO/PRO 4G to Wi-Fi using WPS Mode?

Connecting your Olarm to Wi-Fi using WPS Mode

You can now connect your Olarm PRO/PRO 4G to your Wi-Fi network using the WPS Mode

Notes
Only 2.4Ghz Wi-Fi Networks are supported

On your Olarm PRO

  1. Once the Olarm PRO has been powered on
  2. Wait for it to start flashing green
  3. Press and hold the Fn button on the Olarm PRO for 5 seconds until it turns yellow
  4. The Olarm PRO will then turn solid blue once connected to the Wi-Fi

On your WPS capable Router

  1. Press the WPS mode button on the Wi-Fi router





Info
Please note only certain firmware versions support this feature. 

Firmware requirements:
  1. 4G, firmware 4.4.2 and up
  2. 2G, firmware 3.5.2 and up
Olarm PRO/PRO 4G from Batch “-M” onwards will come with firmware able to utilise WPS mode out of the box. However, older batches will need to be updated before this feature will works. The batch number is displayed on the back of the Olarm device.