How to connect an Olarm MAX to a Centurion Sector 2 gate motor
Step 1: Connect the Olarm MAX
Cut and strip both sides of the reversible peripheral cable. Wire one of the stripped ends of the cable to the Olarm MAX as follows:
Red to + (Positive)
Black to GND
Green to IO PORT 1
Cut off the yellow wire should it not be used
Wire the other stripped end of the cable to the Centurion Sector 2 gate motor controller as follows:
Red to Aux 12V Out
Black to Com
Green to Raise
Cut off the yellow wire should it not be used
Step 2: Put the Olarm MAX into Standalone Mode
Once the device has powered up, add the Olarm MAX to the Olarm APP and put the device into standalone mode by following the steps below.
Tap on the Menu icon
Select Device Setup
Change the Olarm MAX Setup to “NO”
You are telling the Olarm MAX that it is not connected to an alarm system or an electric fence
Step 3: Setup the IO Port in the Olarm APP
The IO Port 1 will need to be setup as an output to trigger the Centurion Sector 2 gate motor. Follow the steps below to setup IO Port 1 in the Olarm APP.
Tap on the Menu icon
Select Device Setup
Go to Input/Output
Click the Arrow & select IO Port 1
Enable the toggle to activate the port
Give the port a Name (ie. Home Gate)
Tap the Settings dropdown
Select “Output” for the Port type
Select “Pulse” for the Mode
Enter “300” for duration & select “milliseconds”
Choose the Button Icon, Colour & Text
Select what the port is used for and Save
Related Articles
How to connect an Olarm MAX to a Centurion D5 EVO gate motor
Step 1: Connect the Olarm MAX Cut and strip both sides of the reversible peripheral cable. Wire one of the stripped ends of the cable to the Olarm MAX as follows: Red to + (Positive) Black to GND Green to IO PORT 1 Cut off the yellow wire should it ...How to connect an Olarm MAX to a Centurion D5 SMART gate motor
Step 1: Connect the Olarm MAX Cut and strip both sides of the reversible peripheral cable. Wire one of the stripped ends of the cable to the Olarm MAX as follows: Red to + (Positive) Black to GND Green to IO PORT 1 Cut off the yellow wire should it ...How to connect an Olarm MAX to a Centurion D5 gate motor
Step 1: Connect the Olarm MAX Cut and strip both sides of the reversible peripheral cable. Wire one of the stripped ends of the cable to the Olarm MAX as follows: Red to + (Positive) Black to GND Green to IO PORT 1 Cut off the yellow wire should it ...How to connect an Olarm MAX to a Centurion D10 gate motor
Step 1: Connect the Olarm MAX Cut and strip both sides of the reversible peripheral cable. Wire one of the stripped ends of the cable to the Olarm MAX as follows: Red to + (Positive) Black to GND Green to IO PORT 1 Cut off the yellow wire should it ...How to connect an Olarm MAX to a Centurion D3 gate motor
Step 1: Connect the Olarm MAX Cut and strip both sides of the reversible peripheral cable. Wire one of the stripped ends of the cable to the Olarm MAX as follows: Red to + (Positive) Black to GND Green to IO PORT 1 Cut off the yellow wire should it ...