Connecting to a IDS alarm system using Olarm Remote Connect

Connecting to a IDS alarm system using Olarm Remote Connect

Olarm Remote Connect is a tool that allows you to use your Upload & Download (UDL) software remotely via the Olarm MAX or Olarm PRO.


For a full list of alarm systems that are supported, please check out the link below
  1. Open Olarm Remote Connect, you will get the following screen

    1. Generate a code a remote programming code in Olarm Command Centre and copy the code

    1. Paste the code in Olarm Remote Connect, and then click on Connect


    1. Open IDS Swift 2
    2. Click New to set up a new Client Account or click Open for an Existing Client Account

    1. Make sure you have the Panel Firmware and Installer code and fill in all the Mandatory Fields
      1. Account Ref:
      2. Client Name:
      3. Panel Type
      4. Firmware Version
      5. Hardware Version
      6. Installer Code
      7. Download Code
      8. Default Connection

    1. Click OK
    2. Click Connect

    1. Select COM60 and click Connect again


    1. Once you have finished Programming click Disconnect
    Please note:
    Olarm Remote Connect is for use by Accredited Olarm Partners only
     
    If you have any problems, please feel free to contact Olarm Support
    Phone: +27 21 009 0911 
    WhatsApp: +27 60 039 0911 
    E & OE. Terms & conditions may apply.